Hi, I've run into a problem with the Wiser2 that I can't seem to fix and hoping that someone here can offer me some possible solutions. I tinkered with the CBus units the other week through the toolkit (all went well) and then on Sunday went to modify the Wiser controls. This seemed to work, however the app started to behave a bit wierdly. Setting an integer (e.g. for the irrigation timer) wasn't working and after a couple of minutes the app reported to be working in transparent mode. Accessing the CBus network in the toolkit wasn't working either. I checked the project and tried to re-download to the wiser a few times, but with no luck. So, I thought it simplest to go for a factory reset, but this has resulted in the Wiser2 being stuck on the boot screen (pic below). I've tried quite a few combinations of having cables plugged in, leaving it off power for a couple of hours, changing the BIOS battery, but still no luck. One thing that I have observed is that the unit is responding to a Ctrl, Alt + Del and rebooting, but nothing else. [ATTACH=full]3422[/ATTACH] Any help would be really appreciated. Cheers, Russ
