Wiser tracking group addresses through betwork bridge

Discussion in 'C-Bus Wiser 2 Controller' started by intellispec, Jul 2, 2021.

  1. intellispec

    intellispec

    Joined:
    Jul 2, 2021
    Messages:
    3
    Likes Received:
    0
    Hi guys,
    Is there a way to track groups on the far side of NB with the wiser on the near?
    The bridge is set to transmit all applications to adjacent neteork and I can control the groups on the far side however, if yu close the app and reopen, they're displayed as off even though they're on.. TIA
     
    intellispec, Jul 2, 2021
    #1
  2. intellispec

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,546
    Likes Received:
    178
    Location:
    Adelaide, Australia
    Which Wiser do you have?

    Are you referring to Smart Phone app, or restarting the actual Wiser here?
     
    Ashley, Jul 5, 2021
    #2
  3. intellispec

    intellispec

    Joined:
    Jul 2, 2021
    Messages:
    3
    Likes Received:
    0
    Wiser 2, client using ios app... 4 metworks, 3 are across bridges... If he turns on a group in the app then closes and reopens the app, the group shows as off although its actually still on...
     
    intellispec, Jul 6, 2021
    #3
  4. intellispec

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,546
    Likes Received:
    178
    Location:
    Adelaide, Australia
    Do you mean the bridge(s) are set to 'application connect mode' so there is one common set of groups across all networks?
     
    Ashley, Jul 6, 2021
    #4
  5. intellispec

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    323
    Likes Received:
    5
    Location:
    FNQ
    Have you programmed both sides of the bridges?
     
    Mr Mark, Jul 7, 2021
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.