Toolkit Not Saving Correctly

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Dave Byron, Aug 10, 2010.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Tookit does not save the DLT key setting when set to "shutter Toggle" on the first save but if you open the switch a second time and set the faulty key, it will correctly save the second time. Have tried on XP.

    To Test
    Created a new project
    Added a shutters App - 57
    Addded a DLT
    Set the Secondary App to Shutters
    Configured Keys 2-4 to different groups and "Shutter Toggle"
    Save
    Reopen switch and the setting not correct
    Reset faulty key
    Save
    Reopen - all correct
     

    Attached Files:

    Last edited by a moderator: Aug 10, 2010
    Dave Byron, Aug 10, 2010
    #1
  2. Dave Byron

    george

    Joined:
    Jul 26, 2004
    Messages:
    158
    Likes Received:
    1
    Location:
    Adelaide
    Hi Dave. Thanks for the report. Defect ID: #20093
     
    george, Aug 11, 2010
    #2
  3. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    George,
    Not sure if this a bug.
    When you configure a key as a "Timer" save and reopen, Toolkit
    now shows it as a "Custom" setting not a Timer.

    Is Toolkit supposed to check for valid lengths of DLT text like it used to do - Red to long ???

    dave
     
    Last edited by a moderator: Aug 11, 2010
    Dave Byron, Aug 11, 2010
    #3
  4. Dave Byron

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    I also noticed that setting timer comes up as custom when re-opening unit. but this was not just happening with DLT had same issue with other NEO and Saturn key units.
     
    constantcharge, Aug 11, 2010
    #4
  5. Dave Byron

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Known issue, it will be fixed in the next Toolkit release.
     
    Newman, Aug 11, 2010
    #5
  6. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina

    When's the new Toolkit out, this bug causing a lot of pain on a big job.
    Any suggestions for a work around in the mean time

    tks
    dave
     
    Dave Byron, Oct 2, 2010
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SENPIRSS Saving Serial with New Toolkit

  2. Partname not saving to Network Unit

  3. Saving to Database in Toolkit

  4. Toolkit errors when saving to network

  5. Status indicators between B&W Touch & Schedule Plus not correctly

  6. General Input Unit - Values Not Always Saving?

  7. Cbus not working correctly

  8. DLT Dynamic 2 not displaying correctly

Loading...