Toolkit error with CNI scan but not Serial scan

Discussion in 'C-Bus Toolkit and C-Gate Software' started by mcsortan, Sep 25, 2022.

  1. mcsortan

    mcsortan

    Joined:
    Mar 16, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    adelaide
    I have been fault finding my Cbus system all weekend after suspecting that the CNI in my Wiser 2 had died.

    I can scan my network perfectly with Toolkit when I use a 5500PC and serial connection.

    When I use either the Wiser 2 or the 5500PC via CNI (using a serial to ethernet adaptor for the 5500PC) Toolkit throws up exception errors OR will only partially scan my network an then hang.
     
    mcsortan, Sep 25, 2022
    #1
  2. mcsortan

    mcsortan

    Joined:
    Mar 16, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    adelaide
    Nup, I was wrong

    got the 5500PC with RS232 to IP converter working and scanning perfectly

    Again, my Wiser 2 CNI is dead, but otherwise the Wiser works perfectly

    Sorry for the continued posts
     
    mcsortan, Sep 25, 2022
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CNI - background network scan (autosynchronisation)

  2. Wiser CNI - Unable to scan the network and res cross on C-Bus

  3. 4 gang switch, serial number not set error

  4. Not all Dali lights turn on every time with cbus but do with dali programmer

  5. Not all Dali lights turn on every time with cbus but do with dali programmer

  6. Can't Connect to C-Bus via CNI-2 But No Problems with PCI...

  7. Universal 4 channel dimmer L5504D2UP works but doesn't show in network scan

  8. Toolkit won't scan properly - suspect dead Wiser 2 CNI?

Loading...