Toolkit crashing

Discussion in 'C-Bus Toolkit and C-Gate Software' started by theboyg, Nov 27, 2023.

  1. theboyg

    theboyg

    Joined:
    Apr 3, 2005
    Messages:
    210
    Likes Received:
    9
    Running 1.16.0 for quite some time, never had an issue in 20 years, on Windows. Today I'm seeing this:
    [JCLDEBUGOUTPUT:]
    Exception occured at $007273DD (Module: ComObj, Procedure: ComObj.CreateComObject, Source: , Line: 0)
    Exception 'EOleSysError' in module CBusToolkit.exe at 001263DD
    Class not registered, ClassID: {12892CF4-39CE-4AA0-B190-0FDC3A015BF7}

    Connection to CGate is fine, it's populating the data, but as soon as I try to open a unit from the local db, the error above occurs.

    Any thoughts as to what this is before I start butchering the install? I did a repair check on the config already, no change.

    Thanks
     
    theboyg, Nov 27, 2023
    #1
  2. theboyg

    theboyg

    Joined:
    Apr 3, 2005
    Messages:
    210
    Likes Received:
    9
    Just went ahead and installed 1.16.3 and that fixed it.
     
    theboyg, Nov 28, 2023
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.