Timed Toggle

Discussion in 'C-Bus Toolkit and C-Gate Software' started by James Glendenning, Mar 21, 2018.

  1. James Glendenning

    James Glendenning

    Joined:
    Mar 21, 2018
    Messages:
    1
    Likes Received:
    0
    Hi Guys,
    Just joined the forum and have a question, Just installed cbus in our office and have a set of gates wired to a 4 channel relay, is it at all possible i can set a timer through a DLT switch that will switch the Gate relay on every 15mins and leave it running during working hours? Thanks in advance ps its a stand alone cbus system with no wiser etc
     
    James Glendenning, Mar 21, 2018
    #1
  2. James Glendenning

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    That sentence doesn't make a lot of sense ;) When does it ever get switched off?

    No. DLT's have no scheduling ability. You will need a Wiser, PAC, SHAC etc.
     
    Ashley, Mar 21, 2018
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. "Memory" rather than "toggle" mode

  2. Toggle, retrig, toggle, idle

  3. Light toggle & fan run-on timer with 1 key?

  4. Quick Toggle in Toolkit 1.1.4

  5. Toggle timer issue with blind control

  6. timed scene

  7. Spectrum, SENPIRIA and timed dimming

  8. PIR Sensor - different lighting levels in its timed cycle

Loading...