SpaceLogic C-Bus Commission 2.9.0 and Toolkit 1.18.2 - HELP

UK Household Automation · 2025-10-20

Its pretty clear that in a new C-Bus intal you would use Spacelogic commission software Its also stated that in an old install Toolkit 1.18.2 should be sed as its supported. What happens if you have a old install that requires (say) a new dimmer or relay and you have to use a Spacelogic product. What software should be used to commission.

Discussion in 'C-Bus Toolkit and C-Gate Software' started by UK Household Automation, Oct 20, 2025 at 5:45 PM.

UK Household Automation

Joined:

Aug 6, 2004

Messages:

123

Likes Received:

2

Its pretty clear that in a new C-Bus intal you would use Spacelogic commission software

Its also stated that in an old install Toolkit 1.18.2 should be sed as its supported.

What happens if you have a old install that requires (say) a new dimmer or relay and you have to use a Spacelogic product.
What software should be used to commission.

UK Household Automation, Oct 20, 2025 at 5:45 PM

#1

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Welcome to the C-Bus Forums!

Welcome to the C-Bus Forums, for help and advice with Clipsal/Schneider C-Bus devices. From time to time you will see Clipsal staff on the forums, but this is not an official support channel.

Please join our friendly community by clicking the button below - it only takes a few seconds and is totally free. You'll be able to ask questions about your C-Bus products or chat with the community and help others. Ask a Question