Scenes on a 4 gang unit.

Discussion in 'C-Bus Toolkit and C-Gate Software' started by mattmac, Apr 5, 2009.

  1. mattmac

    mattmac

    Joined:
    Apr 5, 2009
    Messages:
    2
    Likes Received:
    0
    I was just wondering if it was possible to trigger a scene from a 4 gang key input unit without making that entire unit a trigger control application. I need to trigger an all off scene from this switch. i understand these swithces do not have secondary function but thought it might be possible through logic or something. Any help?
     
    mattmac, Apr 5, 2009
    #1
  2. mattmac

    filpee

    Joined:
    May 31, 2006
    Messages:
    204
    Likes Received:
    0
    Location:
    Western Australia
    Where is the scene located?

    on a touchpanel, PAC or homegate?

    if so then you can set the scene trigger on these to use the lighting application.

    If the scene is on a Key input like a saturn or reflection then you can only use the trigger application.
     
    filpee, Apr 6, 2009
    #2
  3. mattmac

    mattmac

    Joined:
    Apr 5, 2009
    Messages:
    2
    Likes Received:
    0
    Okay i see. The scene is located in a MMD touchscreen.
     
    mattmac, Apr 6, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Weirdness with Saturn 6 gang input

  2. 2 Gang Saturn Wireless Issue

  3. scenes from std 2 gang switch

  4. Saturn 4 Gang

  5. Can a Neo 8 gang-key input unit trigger scene stored on a SENPILL?

  6. Scenes without scenes

  7. pac unit for scenes

  8. Will a Bus Coupler fit in a 1 gang / 2 Gang wall box (USA)

Loading...