Scene Modify - Scene Toggle

Discussion in 'C-Bus Toolkit and C-Gate Software' started by ColinNz, Nov 25, 2006.

  1. ColinNz

    ColinNz

    Joined:
    Jul 7, 2006
    Messages:
    2
    Likes Received:
    0
    Hi,
    Button 1 on my Saturn controls a Scene Toggle, this switches on (and off) a number of lights primarily controlled by other units. It was used this way so as to allow a single button to switch on and off a scene. The unit toolkit window shows this 'scene' greyed out whilst the drop down list shows the selected 'Scene Modify'. I wish to modify the various lights controlled by this switched scene but have been unable to locate it through the maze of selections.
    Can you assist?

    Cheers
    Colin
     
    ColinNz, Nov 25, 2006
    #1
    1. Advertisements

  2. ColinNz

    Mark

    Joined:
    Oct 28, 2004
    Messages:
    196
    Likes Received:
    0
    Location:
    Grenoble, France
    Scene Modifiers

    Hi ColinNz,

    A scene modifier applies to the last scene set by a key unit. This allows you to have multiple scenes on the one unit, and the Scene Modifier will toggle/dim the most recently used.

    To modify the loads being toggled you will need to modify the scene itself, which will be on a different key. The Scene Modifier requires no change.

    Cheers,
    Mark.
     
    Mark, Nov 26, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.