Scanning network through a Minder and CBus toolkit?

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Ltlbighief, Dec 7, 2004.

  1. Ltlbighief

    Ltlbighief

    Joined:
    Dec 7, 2004
    Messages:
    8
    Likes Received:
    0
    Location:
    Gold Coast
    I have just tried to scan the the cbus network using CBus toolkit and a Minder instead of a PC Interface. The network consists of a Minder and 1 x 8chl dimmer, when I do the network scan: it finds the minder, then trys to locate the project name, this is where it stops. Then about 10 seconds later I'll get a blue screen with the following error on it.

    ........
    An error has occured. To continue:
    Press enter to return to Windows or
    Press CTRL+ALT_DEL to restart your computer. If you do this ............

    VWIN32(05) + 000012D0 Eroor: 0E : 0028 :C02A44A8
    .........
    I have the information that was in the DOS window, sorry coulndn't figure out how to insert it.

    I know the com port is correct and I'm using Windows ME.

    If you guys need anything else just let me know.

    Thanks in advance
    Ltlbighcief
     
    Ltlbighief, Dec 7, 2004
    #1
    1. Advertisements

  2. Ltlbighief

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia

    Hi Ltlbighcief,

    Scanning the network through a Minder is not supported alas.
     
    Duncan, Dec 7, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.