question on thermostats

Discussion in 'C-Bus Toolkit and C-Gate Software' started by willplaice, Jun 20, 2012.

  1. willplaice

    willplaice

    Joined:
    Jan 16, 2007
    Messages:
    7
    Likes Received:
    0
    might not be the right place to post this but...

    I have some simple heating and cooling kit that is already controlled by relays..

    I use some external sw (cqc) to control this based on timers and temp.

    i want to make my system less reliant on cqc, and want to add some cbus thermostats to the system.

    when complete 4 zones, and i guess one of the 4 zone stats...(5070THPPG, WE)

    I assume these work with the temp sensors (5031RDTSL)

    1. can someone confirm that the sensors broadcast, and i can therefore get the temp values via cgate ?
    2. what sort of control is there over the thermostat, can i program (and configure) that via cgate ?

    advice would be appreciated.

    Will
     
    willplaice, Jun 20, 2012
    #1
  2. willplaice

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,402
    Likes Received:
    28
    Location:
    Adelaide, South Australia
    The temperature sensors you list can act as remote sensors for the thermostat.

    C-Gate can control and monitor the thermostat.

    Plain ole big ordinary lighting commands to cgate WILL NOT control or monitor the thermostat, its a bit different, but it is supported (and was back in about 2009).
     
    ashleigh, Jun 20, 2012
    #2
  3. willplaice

    willplaice

    Joined:
    Jan 16, 2007
    Messages:
    7
    Likes Received:
    0
    many thanks,

    where would i look for supported commands and examples for controlling the thermostat via cgate?

    Will
     
    willplaice, Jun 25, 2012
    #3
  4. willplaice

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,402
    Likes Received:
    28
    Location:
    Adelaide, South Australia
    There is a cgate manual - hunt around in the toolkit and cgate folders looking for a PDF file. That would be a good start.
     
    ashleigh, Jun 25, 2012
    #4
  5. willplaice

    willplaice

    Joined:
    Jan 16, 2007
    Messages:
    7
    Likes Received:
    0
    for reference,

    manual included with install

    C:\Clipsal\C-Gate2\CGateManual.chm
     
    willplaice, Jun 25, 2012
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.