Problems updating firmware on 5508D1D

Discussion in 'C-Bus Toolkit and C-Gate Software' started by MattB, May 31, 2026 at 12:21 PM.

  1. MattB

    MattB

    Joined:
    Aug 9, 2004
    Messages:
    6
    Likes Received:
    0
    Location:
    Sydney
    Anyone had issues updating firmware on these?
    Have a 5516RVF that appeared in the update list and updated no worries but with the same setup could not get 2 different dimmers to show up on the list.
    Have latest versions of commission and toolkit and c-gate downloaded today running on windows 10.
    Tried just connecting usb, USB and cbus, USB and 240v to all 3 connections and USB, Cbus and 240v. Same thing it just sits there with the spinning wheel when you hit refresh.
    Can see them in the project screen and have connected and programmed it but commission software is telling me they need firmware update. Current firmware is 1.3 and supposed to go to 1.4?
    Any ideas?
     
    MattB, May 31, 2026 at 12:21 PM
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PAC problems with latest firmware / PICED

  2. Having Problems connection to Wiser after updating Toolkit and PICED

  3. Old BW C-Touch firmware not updating

  4. Updating eDLT firmware

  5. 5508D1D internal temperature warning

  6. New Dimmer 5508D1D ramping rate slow compared to old dimmer

  7. Replace old dimmer with 5508D1D - WHAT SOFTWARE to use

  8. New Dimmer 5508D1D

Loading...