Problem with "All to Database" on wireless network in Toolkit 1.6.0

Discussion in 'C-Bus Toolkit and C-Gate Software' started by george, Jan 29, 2007.

  1. george

    george

    Joined:
    Jul 26, 2004
    Messages:
    158
    Likes Received:
    1
    Location:
    Adelaide
    There was a problem reported with the feature "All to Database" on the wireless network. Please do no transfer wireless units from network to database using "All to Database" in Toolkit 1.6.0 as the transferred data may not be saved to the database. Please use "Add to Database" or "Transfer to Database" instead.

    No such problem was observed on wired network.

    (Defect #10323)

    Service pack addressing this and a few other issues will follow.

    Regards,
    George
     
    george, Jan 29, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Toolkit 1.1.8 and Wireless Network

  2. Wireless Network Problem

  3. Toolkit causes BSOD when copying tags from wired to wireless network.

  4. configuring wireless units with toolkit software

  5. Integration 3 C-bus network and 8 Dali network Problem

  6. Network Problem with C-Gate

  7. Toolkit scan network problem

  8. C-Touch Colour problem with Network Adapter

Loading...