Network not closing

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Leigh, Oct 23, 2005.

  1. Leigh

    Leigh

    Joined:
    Feb 2, 2005
    Messages:
    75
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    I have recently completed a C-Bus course and I am still on a steep learning curve.

    I have been programming some C-Bus equipment. I can open a network and modify it without problems. If I select "Close Network" in Toolkit the 'running' status changes to 'closing' but then never changes to 'closed'.

    Any suggestions what the problem is?
     
    Leigh, Oct 23, 2005
    #1
  2. Leigh

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Even in toolkit 1.1.9 if u close the network while the network is selected it never says "closed" stays on "closing"


    dave
     

    Attached Files:

    Dave Byron, Oct 28, 2005
    #2
  3. Leigh

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Yep.. noted. Tks.

    For the record.. it does actually get closed.
     
    Duncan, Oct 28, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.