multi sensor working oK Not really :(

Discussion in 'C-Bus Toolkit and C-Gate Software' started by mikegriff, Sep 12, 2005.

  1. mikegriff

    mikegriff

    Joined:
    Aug 3, 2004
    Messages:
    153
    Likes Received:
    3
    Location:
    Wales
    Hi All
    what have I got wrong here?
    I seem to have my multi sensor working oK
    but this is still in the Logs:
    Multi sensor is on 52
    Light sensor is on 90
    thanks in advance
    Mike



    12/09/2005 00:35:00 C-Gate : Tx "&[421]do p/254/90 psync"
    12/09/2005 00:35:00 C-Gate : Tx "&[422]get p/254/90 lightlevel"
    12/09/2005 00:35:00 C-Gate : Tx "&[423]do p/254/52 psync"
    12/09/2005 00:35:00 C-Gate : Tx "&[424]get p/254/52 lightlevel"
    12/09/2005 00:35:01 C-Gate : Rx "[422] 300 //MGU/254/p/90: lightlevel=65"
    12/09/2005 00:35:01 C-Gate : Rx "[424] 300 //MGU/254/p/52: lightlevel=0"
    12/09/2005 00:35:02 C-Gate : Rx "[421] 202 Done: //MGU/254/p/90"
    12/09/2005 00:35:02 C-Gate : Rx "[423] 408 Operation failed: //MGU/254/p/52 ()"
    12/09/2005 00:35:20 C-Gate : Tx "&[425]do p/254/90 psync"
    12/09/2005 00:35:20 C-Gate : Tx "&[426]get p/254/90 lightlevel"
    12/09/2005 00:35:20 C-Gate : Tx "&[427]do p/254/52 psync"
    12/09/2005 00:35:20 C-Gate : Tx "&[428]get p/254/52 lightlevel"
    12/09/2005 00:35:21 C-Gate : Rx "[426] 300 //MGU/254/p/90: lightlevel=65"
    12/09/2005 00:35:21 C-Gate : Rx "[428] 300 //MGU/254/p/52: lightlevel=0"
    12/09/2005 00:35:21 C-Gate : Rx "[425] 202 Done: //MGU/254/p/90"
    12/09/2005 00:35:22 C-Gate : Rx "[427] 408 Operation failed: //MGU/254/p/52 ()"
    12/09/2005 00:35:40 C-Gate : Tx "&[429]do p/254/90 psync"
    12/09/2005 00:35:40 C-Gate : Tx "&[430]get p/254/90 lightlevel"
    12/09/2005 00:35:40 C-Gate : Tx "&[431]do p/254/52 psync"
    12/09/2005 00:35:40 C-Gate : Tx "&[432]get p/254/52 lightlevel"
    12/09/2005 00:35:41 C-Gate : Rx "[430] 300 //MGU/254/p/90: lightlevel=65"
    12/09/2005 00:35:41 C-Gate : Rx "[432] 300 //MGU/254/p/52: lightlevel=0"
    12/09/2005 00:35:42 C-Gate : Rx "[429] 202 Done: //MGU/254/p/90"
    12/09/2005 00:35:42 C-Gate : Rx "[431] 408 Operation failed: //MGU/254/p/52 ()"
     
    mikegriff, Sep 12, 2005
    #1
  2. mikegriff

    qun

    Joined:
    Sep 27, 2004
    Messages:
    16
    Likes Received:
    0
    Multi Sensor

    Hi Mike,

    Please do the following:

    1. Check the lux value on the GUIs of Multi Sensor and Light Level.

    2. On the Multi Sensor, rotate the Pot A to fully clockwise and check if it works or not during the daytime.
    If it is possible reduce and measure the ambient lux until the load get triggered.
     
    qun, Sep 13, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-touch screen not working

  2. Auto Login not working?

  3. keypads not working

  4. Homegate via CGate not working

  5. Built-in interlocking feature in DIN relays, is it really working?

  6. 06-030-1 Multi Sensor As A Light Level Sensor Only

  7. Multi-sensor as Lux sensor

  8. Homegate 1/2 Networks Online (but not really)

Loading...