maybe trivial, but, displaying of Part Numbers

Discussion in 'C-Bus Toolkit and C-Gate Software' started by coppo, Nov 10, 2004.

  1. coppo

    coppo

    Joined:
    Sep 7, 2004
    Messages:
    221
    Likes Received:
    10
    Location:
    Adelaide
    as i said, this may be trivial to experienced users,
    however, i guess with the "Toolkit" a lot of new users are expected...

    when i first looked at "ADD UNIT" , i thought that some were missing,
    due to the first ones being presented at the top of the list being "non learn" models. ( the same models in LEARN are listed at the bottom of the list due to sorting method )

    considering that you really would be pushing to buy NEW stuff these days
    that is not learn capable ( still some legacy products out there )...
    i find this confusing to newer users.

    might i suggest that there be an option ( tick/untick) where you can select that only currently manufactured product is displayed. this would alleviate newer users from putting up with stuff they may never see and inadvertently program into their project.

    my guess is that if they go to an existing job with old non-learn product, the first thing they will do is SCAN the network , thus the old style units will be put into their project automatically anyway....

    CIS, then via updates, could amend the "currently available products" list.
    ( at worst i would think this to be a 6 monthly/yearly update)
     
    coppo, Nov 10, 2004
    #1
  2. coppo

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Nice idea! noted for a future release.
     
    Duncan, Nov 10, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.