How to Set Address and group in Toolkit

Discussion in 'C-Bus Toolkit and C-Gate Software' started by chinz_minz, Jun 7, 2013.

  1. chinz_minz

    chinz_minz

    Joined:
    Jun 7, 2013
    Messages:
    1
    Likes Received:
    0
    Location:
    Malaysia
    Hello everyone.
    my name is joe.
    i just bought 2 dimmer unit with 1 PCI
    now i'm trying to program that.

    First thing to do is setting the dimmer address, am i right?
    i set :

    Dimmer Module 1, Address 1.
    Channel 1--> Group 2
    Channel 2--> Group 3
    Channel 3--> Group 4
    Channel 4--> Group 5

    Dimmer Module 2, Address 2.
    Channel 1--> Group 6
    Channel 2--> Group 7
    Channel 3--> Group 8
    Channel 4--> Group 9

    am i right?

    notice me if i'm wrong.
    thank you.
    [​IMG]
    [​IMG]
     
    chinz_minz, Jun 7, 2013
    #1
  2. chinz_minz

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,308
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    Hi
    It's OK to assign any group address you want.

    In an installation you would edit the group address to give it a description as well (eg kitchen lights).
     
    DarylMc, Jun 7, 2013
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.