HELP what software to use

Discussion in 'C-Bus Toolkit and C-Gate Software' started by UK Household Automation, Oct 21, 2025 at 1:35 PM.

  1. UK Household Automation

    UK Household Automation

    Joined:
    Aug 6, 2004
    Messages:
    124
    Likes Received:
    2
    I am installing a new spacelynk 16 ch relay onto an old CBUS lighting system.

    Can someone please guide me through the software commissioning route e.g. will we end up with having to use two software packages?

    I'm told that i cannot commission the complete system with either the old toolkit or the new Spacelink software ?
     
    UK Household Automation, Oct 21, 2025 at 1:35 PM
    #1
  2. UK Household Automation

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    472
    Likes Received:
    50
    Location:
    Adelaide
    Unfortunately yes you will be using 2 software packages, The new Space logic software is a different beast, which will require a bit of effort to transition to.
     
    Wonkey, Oct 21, 2025 at 2:53 PM
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. why use cat5

  2. Use of non Clipsal hardware

  3. Can you use regular data routers to transmit C-Bus signals

  4. Use of the Learn options in Wireless units

  5. Use control Names

  6. Software Statistics.. your help needed

  7. Software to use to design floor plans/ house layouts on nac/shac

  8. Replace old dimmer with 5508D1D - WHAT SOFTWARE to use

Loading...