Handling socket death

Discussion in 'C-Bus Toolkit and C-Gate Software' started by cueman, Nov 15, 2004.

  1. cueman

    cueman

    Joined:
    Aug 3, 2004
    Messages:
    20
    Likes Received:
    0
    Location:
    Oxford, UK
    I had a toolkit running, connected to a PCI via a Lantronix MSS100. While the software was running, I pulled the power cable from the MSS100 and put it back in again.

    I later tried using toolkit, and toolkit gave no warnings about anything being wrong, but it failed to communicate with the cbus network. Looking at the cgate output, it was complaining that it was unable to talk to the MSS100. However, the MSS100 was up and running, but I guess cgate was using references to the original socket, now defunct.

    It would be nice if a toolkit user was told about such failures. Nicer still if cgate could auto-reconnect as well.
     
    cueman, Nov 15, 2004
    #1
    1. Advertisements

  2. cueman

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Hi Paul,

    I'll try this scenario and work out what we can do to improve it.
     
    Duncan, Nov 15, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.