Good result using DMX for LED dimming

Discussion in 'C-Bus Wired Hardware' started by MarkB, Oct 25, 2019.

  1. MarkB

    MarkB

    Joined:
    Feb 2, 2019
    Messages:
    18
    Likes Received:
    5
    After some good advice in this thread:

    https://www.cbusforums.com/threads/...ali-gateway-dali-input-led-power-supply.9444/

    I ended up purchasing a 5500DMX, din rail DC power supply and these DMX dimming modules:

    http://www.dalcnet.com/en/products/led-dimmer-pro-bus-4-channel-series/

    I have tested it on some LED strips as well as LED downlight bulbs and the result is very smooth dimming down to 1-2% or so and no flicker, etc. At 0% the output is off, with no glow from the LED at all.

    I purchased the DMX modules from a supplier in Italy for 73 € each. PM for details if you're interested.
     
    MarkB, Oct 25, 2019
    #1
    newsreader and Timbo like this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2 Switches - Same Result - Problem...

  2. LED lighting dimming & non-dimming.

  3. Trailing edge dimming for LED GU10

  4. C-Bus and LED Dimming using Tridonic Ballast

  5. DMX - 550DMX - Documentation shows DMX Desk?

  6. LED Strip light / DMX gateway / DMX driver

  7. DMX or DALI for LED's

  8. Potential LED Dimming solution. Dali Gateway>Dali input LED Power Supply?

Loading...