Firmware version not correct in database view

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Charlie Crackle, May 29, 2006.

  1. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    I replaced a fauty Dimmer on a site today.

    removed the old added the new and copied the config tool kit option it discovered the new unit and copy worked great

    Noticed. New dimmer has newer firmware than the old one.

    In the units view firmware version is correct. in the database view the firmware version is the version from the old unit.

    Copy net to database does not fix

    Charles
     
    Charlie Crackle, May 29, 2006
    #1
  2. Charlie Crackle

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Hi Charlie,

    Opening the database unit should align the firmware versions..

    I agree, transfer from Net to DB should do the same.
     
    Duncan, May 29, 2006
    #2
  3. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    I am sure I did this too and did not work.

    I just checked and confirmed.

    This does not work either......

    Charles
     
    Charlie Crackle, May 31, 2006
    #3
  4. Charlie Crackle

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Will double check the impending release.
     
    Duncan, May 31, 2006
    #4
  5. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    Duncan,
    Does the pending release do the same ?? Is there any way to manualy fix this issue. saving from network to database does not fix either

    See Pic.

    Charles
     

    Attached Files:

    • firm.JPG
      firm.JPG
      File size:
      170.4 KB
      Views:
      431
    Charlie Crackle, Jul 16, 2006
    #5
  6. Charlie Crackle

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    766
    Likes Received:
    20
    Location:
    Adelaide
    Hi Charlie, just to confirm, is this Toolkit 1.4.0 or later?

    Thanks,
    Daniel
     
    daniel, Jul 17, 2006
    #6
  7. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    Tool kit 1.4.0
     
    Charlie Crackle, Jul 17, 2006
    #7
  8. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    I replaced a Version 1.0 Multisensor with a version 2.0 Multisensor


    Did the nifty reinstall.. All worked ok

    THen double clicked on the database view and got warning that it was going to convert because the GUI for units was different

    then this error.
     

    Attached Files:

    Charlie Crackle, Aug 7, 2006
    #8
  9. Charlie Crackle

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    766
    Likes Received:
    20
    Location:
    Adelaide
    Thanks Charlie, we've logged it for investigation (#9148)

    Cheers!
     
    daniel, Aug 8, 2006
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. NEWUNIT in part name field in Database view.

  2. C-Touch Firmware Update? Version 2 C-Touch

  3. Upgrading the firmware version in the database view

  4. Different Version/Firmware of PCI

  5. Is this code correct for the job

  6. Correct unit for on/off of 13amp socket

  7. Version 1 vs version 2 cbus

  8. CTouch Version 2 PS with CTouch Version 3 touch screen

Loading...