Empty DLT labels

Discussion in 'C-Bus Toolkit and C-Gate Software' started by PGale, May 28, 2007.

  1. PGale

    PGale

    Joined:
    May 27, 2007
    Messages:
    19
    Likes Received:
    0
    PGale, May 28, 2007
    #1
  2. PGale

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,402
    Likes Received:
    28
    Location:
    Adelaide, South Australia
    No change.

    This requires both a change to firmware and to Toolkit.

    You might see notes here from time to time that an issue has been logged.

    That means we have recorded it for some future time, that does not mean any work has started, nor is it a commitment to do anything. We evaluate the many competing needs for improvements or new products and prioritise amongst those as best we can.
     
    ashleigh, May 29, 2007
    #2
  3. PGale

    PGale

    Joined:
    May 27, 2007
    Messages:
    19
    Likes Received:
    0
    OK thanks.
     
    PGale, May 29, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. DLT labels

  2. DLT Scene Labels

  3. PICED won't compile empty IF / THEN / ELSE

  4. Toolkit 1.3 and DLT labels

  5. Unable to apply labels for Trigger Control on DLT

  6. DLT labels reverted to default

  7. Dynamic Dlt Labels

  8. Wireless Client Table empty

Loading...