CTC and Wiser2 fighting - Wiser2 in control??

Discussion in 'C-Bus Wiser 2 Controller' started by bartmanz, Jan 11, 2024.

  1. bartmanz

    bartmanz

    Joined:
    Oct 18, 2014
    Messages:
    5
    Likes Received:
    0
    Location:
    Wellington
    Hi

    I have a Rebuilt CTC and a Wiser2 in the same house. When you turn a light on from CTC the Wiser2 see this, if you try and turn the light off via the CTC it will not turn off as the Wiser2 is registering that the circuit is still on.

    How do I solve this - its driving me nuts.

    Stu
     
    bartmanz, Jan 11, 2024
    #1
  2. bartmanz

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,559
    Likes Received:
    183
    Location:
    Adelaide, Australia
    This should not happen. If you change a group from one device the other will update its state appropriately. You have something configured incorrectly. Are you running duplicate logic in both devices? This can cause this type of problem. Else run the Cbus diagnositc utility and see what commands are beibg issued from both devices when you perform the above operation.
     
    Ashley, Jan 11, 2024
    #2
  3. bartmanz

    bartmanz

    Joined:
    Oct 18, 2014
    Messages:
    5
    Likes Received:
    0
    Location:
    Wellington
    Will check when i am back onsite

    Cheers
     
    bartmanz, Jan 23, 2024
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Web pages and Video in the CTC

  2. SlimServer Control from CTC

  3. Warming to irrigation control in CTC

  4. CTC and MONO no sync

  5. Wiser home control on CTC

  6. putting wheather forecast and currency indeks on ctc

  7. CTC and remote connection via wiser

  8. Sweep Fan control and ctc's

Loading...