Connect to C-BUS via Color C-Touch

Discussion in 'C-Bus Toolkit and C-Gate Software' started by nigeltodd, Sep 15, 2006.

  1. nigeltodd

    nigeltodd

    Joined:
    Sep 27, 2005
    Messages:
    32
    Likes Received:
    0
    Location:
    Melbourne
    is it possible to use Toolkit to configure your network, but only connecting through the Etherenet port of the Color C-Touch? This would save the need for connecting a PCI to the network to do the programing when a C-Touch is installed.

    Thanks for any suggestions or ways to do it if it is in fact possible!!

    Nigel
     
    nigeltodd, Sep 15, 2006
    #1
  2. nigeltodd

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,392
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    This is not possible, and not planned.
     
    ashleigh, Sep 15, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.