Cbus not working correctly

Discussion in 'C-Bus Toolkit and C-Gate Software' started by tidefan, Dec 10, 2014.

  1. tidefan

    tidefan

    Joined:
    Jan 6, 2009
    Messages:
    45
    Likes Received:
    0
    Location:
    Alabama
    We have a home that has been working good for 5 years. The Cbus system consist of 3 networks A,B,C. We have a touch screen on B with all scenes and logic for the house centrally located in this touchscreen. We are having problems all of a sudden with the touch screen not sending logic or executing scenes to the A network. The touch screen has logic running for all 3 networks, but only the logic and scene commands for network B and C is working. However, we can control individual group address on A from the touchscreen sitting on B. Any suggestions?
     
    tidefan, Dec 10, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-touch screen not working

  2. Auto Login not working?

  3. keypads not working

  4. Homegate via CGate not working

  5. C-Touch (PICED) Backlight On / Alarm Not working

  6. Status indicators between B&W Touch & Schedule Plus not correctly

  7. Toolkit Not Saving Correctly

  8. DLT Dynamic 2 not displaying correctly

Loading...