C-Gate SNELL Problem

Discussion in 'C-Gate Developers' started by cloxton, Dec 14, 2012.

  1. cloxton

    cloxton

    Joined:
    Dec 14, 2012
    Messages:
    1
    Likes Received:
    0
    Location:
    London
    Hello all,
    I'm having a problem after upgrading to the latest firmware of the toolkit Version 1.12.5.

    We're using an old version of C-Lution which was getting the Lux Level every minute via "get p/236/151 lightlevel".

    Since the upgrade, it's not updating that value unless the refresh tick box is clicked in the device page for the SNELL on the tool kit.

    The SENLL is on version 1 firmware.

    Am I doing something wrong or is this a feature of the new software that I need to work around?

    Many thanks for your help.

    Regards
    Chris Loxton
     
    cloxton, Dec 14, 2012
    #1
  2. cloxton

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    766
    Likes Received:
    20
    Location:
    Adelaide
    What version were you using previously?
     
    daniel, Dec 19, 2012
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Gate Component?

  2. Detecting whether the C-Gate server is running?

  3. C-Gate problem

  4. C-Gate COM1 Connection Problem

  5. Problem with C-Gate 1.5.3

  6. C-Gate Documentation 1.0 for C-Gate 2.5 released

  7. Piced (C-Gate) connection problem

  8. Network Problem with C-Gate

Loading...