C Bus to TAC

Hi,

I am integrating to C Bus via Schneider?s TAC product. I am able to read group address levels etc, but is it possible to read the lux levels that you can view from the multi sensor on Toolkit?

Thanks.

 

You can't get the light level value for TAC Xenta 913.
You can only map the C-Bus group address in to your selected protocol in Xenta 913

 

The Light Level Broadcasting feature of the Multisensor will map the light level onto a Group Address level and periodically broadcast this out onto C-Bus. The measured light level is divided by 10 and then broadcast as the Group Address level, so 480 lux corresponds to level 48 out of 255. I'd assume that you'd be able to do something with this in the TAC system system.

 

Hi,

Thanks for the quick reply, I will give that a try.