Write to File

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Rossco, May 20, 2007.

  1. Rossco

    Rossco

    Joined:
    Aug 15, 2004
    Messages:
    61
    Likes Received:
    0
    Location:
    Victoria
    Is there any possible way of retrieving files that has been written to from the logic in a colour touch screen for viewing on a PC on the network.

    I am logging motor run times and other functons and the client wants to be able to view and print these out on his PC.

    Have test in PICED and works fine, but not in the touch screen.

    Rossco
     
    Rossco, May 20, 2007
    #1
  2. Rossco

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    You can't read the files on the Colour C-Touch across the network. This is done intentionally to preserve the integrity of the Colour C-Touch software.

    If you are desperate, you could use some logic code and TCP/IP sockets to transfer the data from the Colour C-Touch to the PC.
     
    Darren, May 21, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.