wiser group properties in piced

Discussion in 'C-Bus Wiser 1 Controller' started by joshl, Nov 20, 2013.

  1. joshl

    joshl

    Joined:
    May 25, 2008
    Messages:
    68
    Likes Received:
    0
    Howdy

    Just a note since I updated PICED I'm pretty sure I use to be able to double click the group address within the lighting widget page and it would open up the properties showing the label icon, label name, group address etc. At the moment you have to go and select the "All" on the tree on the left hand side and then double click the group address to edit any properties.

    Thanks
     
    joshl, Nov 20, 2013
    #1
  2. joshl

    Robbo_VIC

    Joined:
    Jan 24, 2011
    Messages:
    142
    Likes Received:
    0
    Location:
    Melbourne, VIC
    Hi Josh,
    This is a bug with the latest version of PICED. You also can't change the location or function from the drop down boxes either.
     
    Robbo_VIC, Nov 20, 2013
    #2
  3. joshl

    joshl

    Joined:
    May 25, 2008
    Messages:
    68
    Likes Received:
    0
    Yep I had that to, but if you select your group address first in the lighting application, then select the location it works

    hope it gets fixed soon :)
     
    joshl, Nov 20, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Refreshing Group Addresses in the PICED

  2. Refresh Group Addresses in PICED

  3. WISER Survellance Widget and the latest version of PICED

  4. Power monitoring in PICED / Wiser

  5. Edit group value in Wiser

  6. Wiser & Piced 4.9, What the?

  7. "Match Properties" feature in Piced

  8. Remote Wiser Properties

Loading...