Wiser app

Discussion in 'C-Bus Wiser 1 Controller' started by rmm1, May 31, 2010.

  1. rmm1

    rmm1

    Joined:
    May 24, 2010
    Messages:
    12
    Likes Received:
    0
    Location:
    australia
    I am trying to use the Wiser app on my ipod. if I am trying to do this from within my home. Do I only need to type in
    LAN IP: 10.1.1.17:80 and the "admin" password?

    I haven't opened up any ports to the outside world but do you need to do this even of you only want to run it locally within the local IP range?

    Thanks,
     
    rmm1, May 31, 2010
    #1
  2. rmm1

    Colin Moderator

    Joined:
    Aug 3, 2004
    Messages:
    120
    Likes Received:
    23
    Location:
    Australia
    Yes Just enter your LAN IP to connect on the LAN no port forwarding should be required.
     
    Colin, Jun 1, 2010
    #2
  3. rmm1

    kjayakumar

    Joined:
    Oct 27, 2008
    Messages:
    448
    Likes Received:
    0
    Yes, if you're running it on the LAN only, then you just need the IP of your Wiser and the admin password. You do not need to forward any ports from your edge router to the Wiser if you just want to run it on the LAN alone.

    The IP and password need only be entered once in the iTouch/iPhone UI. After that it is saved on your iPhone/iTouch unless you clear it using settings.
     
    kjayakumar, Jun 1, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wiser iPhone App

  2. Wiser iPhone App Connection Issue.

  3. Wiser App Reconnect Issue

  4. iPad app for Wiser

  5. Remote access to WISER via iphone app

  6. Ipod App - Wiser Widgets

  7. iPad App now on App Store

  8. Wiser vs Wiser HD App

Loading...