Wiser and Power Usage Meter

Discussion in 'C-Bus Wiser 1 Controller' started by Brad Collinder, Sep 30, 2010.

  1. Brad Collinder

    Brad Collinder

    Joined:
    Jun 19, 2010
    Messages:
    40
    Likes Received:
    0
    Location:
    Melbourne
    :confused:
    I am able to transfer a wiser project wirelessly from Piced.
    However when I do this I lose all of the history that the Power Usage Meter has collected.
    Clipsal have informed that the correct way is to "refresh" the project first. Whenever I try this I receive Transfer failed please check connection.
    Everything has been tested and is ok.
    Is there something basic that I am missing, I can't connect to the unit, or transfer from the unit.
    But I can update the project with no problems and transfer to it. I have tried connecting with cable to the unit, no luck.
    Regards
    Brad
     
    Brad Collinder, Sep 30, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.