Wiring to clipsal 5080ctl2

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by evolution, Apr 15, 2013.

  1. evolution

    evolution

    Joined:
    Feb 19, 2013
    Messages:
    10
    Likes Received:
    0
    Location:
    sydney
    Hello,

    Does anyone have an idea how to connect the wiring to the back of a 5080CTL2 touch screen?
    Current wires from wall are blue + orange (joined together)which is positive and orange white + blue white (joined together )which is negative.

    Currently at the back of clipsal 5080CTL2 connectors show as - + - +. So would the wires coming out of the wall need to be separated so each corresponding wire plugs into to their respective + or - or do I connect to 1 set of + and -(does it matter which side, left or right) and leave the other + and - empty ?
     
    Last edited by a moderator: Apr 15, 2013
    evolution, Apr 15, 2013
    #1
  2. evolution

    Don

    Joined:
    Aug 4, 2004
    Messages:
    429
    Likes Received:
    0
    Location:
    Townsville, Australia
    Leave the wires as-is and connect to one of the +/- terminal sets. Leave the second +/- pair of terminals empty. The second set of +/- terminals is in parallel with the first set, and is provided to make for neater wiring if you have a star connection at the C-Touch.
     
    Don, Apr 15, 2013
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. basic wiring

  2. Security Wiring

  3. Colour Touch Screen Wiring Requirements

  4. Wiring Rules (CAT-5) reducing problems

  5. Control Stage Wiring

  6. Creating a new project for CBUS C-5080CTL2

  7. Transferring project to cbus 5080ctl2

Loading...