Why Can't tool kit readdress a Minder ?

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Charlie Crackle, Mar 4, 2006.

  1. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    Why Can't tool kit readdress a Minder ?

    the error is

    "Unit readdress failed check network and unit"


    readdressing works fine with the old 16 bit app.

    Charles
     
    Charlie Crackle, Mar 4, 2006
    #1
  2. Charlie Crackle

    darrenblake

    Joined:
    Nov 1, 2004
    Messages:
    151
    Likes Received:
    0
    Location:
    Melbourne
    re-addressing minder

    Could it be that Home minder is no longer recognised or supported by CIS???
     
    darrenblake, Mar 4, 2006
    #2
  3. Charlie Crackle

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    I know we have an open defect on this issue, but I dont know why its a problem. Will dig it out and have a look on on Monday.
     
    Duncan, Mar 4, 2006
    #3
  4. Charlie Crackle

    rhamer

    Joined:
    Aug 3, 2004
    Messages:
    673
    Likes Received:
    3
    Location:
    Melbourne, Australia
    I had the same problem and went back to V2 to get over it.
     
    rhamer, Mar 5, 2006
    #4
  5. Charlie Crackle

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Defect #4147.. hasnt been looked at.. The PCI inside the Minder is very old, and quite different from other PCI's.. I'm unsure if we're going to get around to resolving this anytime soon.. but I'll bump up its priority a little. Sorry for the inconvenience in the meantime.
     
    Duncan, Mar 5, 2006
    #5
  6. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    Not a big issue because there is a work around. Work on more important stuff.
     
    Charlie Crackle, Mar 6, 2006
    #6
  7. Charlie Crackle

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,391
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    Ah! Music to my ears!
     
    ashleigh, Mar 7, 2006
    #7
  8. Charlie Crackle

    MichaelCarey

    Joined:
    Aug 3, 2004
    Messages:
    183
    Likes Received:
    0
    Location:
    Port Lincoln
    Crap...
    This means I have to keep the older C-Bus software on my systems, just in case I need to re-address my Minder. I was so looking forward to the complete shift to Toolkit compatible software.
    But I suppose I need to keep V2 software, becuase of my HomeGate software upgrade path.
    To install my HomeGate V3.1 upgrade, I need to have V2.x HomeGate installed. But my V2 CD is also an upgrade, so I need to install my original HomeGate V1.3.0.
    BUT, HomeGate V1.3.0 won't install unless V2 C-Bus Programming Software is installed.
    Messy Huh??
     
    MichaelCarey, Mar 7, 2006
    #8
  9. Charlie Crackle

    JohnC

    Joined:
    Apr 6, 2005
    Messages:
    554
    Likes Received:
    1
    Location:
    Sydney
    Maybe CIS would allow you to swap all those 3 x Homegate CD's for one full version of v3 ?
     
    JohnC, Mar 7, 2006
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.