Viewing IP cameras HTML

Hi

I have an ip camera on my network and I can view it ok over the my LAN and the WEB also I can view it on piced on Simulation mode but when I upload the project to the C touch it displays( page cannot be found ) (also with web pages) is this a simple router / network issue or somthing I am missing with the Ctouch set up or firewall? any help

Thanks

 

Can you tell us the URL you are using in the PAC, and grab a copyof the HTML from your PC whilst you are looking at it.

 

Are you using a HTML component to view the web browser or a web cam component ?

If you are using a HTML component, only certain web cameras will work. Refer to the FAQ help topics "Using Web Cams" and "Problems with Displaying HTML".

 

See also http://www.cbusforums.com/forums/showthread.php?t=3415

 

Hi

yes is is a CTC and I did look at
http://www.cbusforums.com/forums/showthread.php?t=3415:
but I think I read it without reading it ( if you know what I mean ) it does answer the question of the ip camera this requires ActiveX etc so I will indever to find the URL, it is an Axis 207, any ideas about web pages not displaying I get the message "Internet explorer cannot display this page" would that be the port set up?

Thanks for you help

basil

 

If you use a Web Cam Component, you will not get this message because it does not use Internet Explorer.

You only need to use a web browser (on your PC) to test that the web cam URL works.