Version 4 PCI

Discussion in 'C-Bus Wired Hardware' started by Tonyo, Aug 16, 2004.

  1. Tonyo

    Tonyo

    Joined:
    Aug 4, 2004
    Messages:
    48
    Likes Received:
    0
    Location:
    Canberra
    The debug software reports that my PCI version is unknown and I should use version 4 or greater. Is this a hardware upgrade? My system is about 3 years old.
    Tonyo
     
    Tonyo, Aug 16, 2004
    #1
  2. Tonyo

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    I take it that the PCI you are connected to has the Aqua-coloured cover? It is most likely to be a version 3 PCI.

    It will still work with the debug software fine, but extra features are available if you use a V4 PCI. Update the PCI if there is something that you need to do using the debug software that you can't do because the feature is greyed out.
     
    Last edited by a moderator: Aug 16, 2004
    Newman, Aug 16, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to run C-Gate under Linux with PCI

  2. Important: Retries and Negative acks from a C-Bus PCI or SIM

  3. Minder PCI - Not compatible with Toolkit

  4. RS232/RJ45 Port on the PCI

  5. Poll: Wireless PCI

  6. Different Version/Firmware of PCI

  7. Version 1 vs version 2 cbus

  8. CTouch Version 2 PS with CTouch Version 3 touch screen

Loading...