V3 C-Bus software and the CNI

Discussion in 'C-Bus Toolkit and C-Gate Software' started by MichaelCarey, Aug 12, 2004.

  1. MichaelCarey

    MichaelCarey

    Joined:
    Aug 3, 2004
    Messages:
    183
    Likes Received:
    0
    Location:
    Port Lincoln
    Hi Everybody,
    I know you CIS guys are not allowed to talk about specific features, but can you enlighten me about the need for the Lantronix software in V3. Can V3 talk to a CNI directly?
    Regards,
    Michael.
     
    MichaelCarey, Aug 12, 2004
    #1
  2. MichaelCarey

    PSC

    Joined:
    Aug 3, 2004
    Messages:
    626
    Likes Received:
    0
    Location:
    Brisbane, Australia
    Yes it can.

    PSC.
     
    PSC, Aug 12, 2004
    #2
  3. MichaelCarey

    MichaelCarey

    Joined:
    Aug 3, 2004
    Messages:
    183
    Likes Received:
    0
    Location:
    Port Lincoln
    Excellent! :)
     
    MichaelCarey, Aug 12, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CNI and PC interface on the same network

  2. PCI, CNI, Lantronics redirection and the Public Release Protocol

  3. Regulating free accessible c-bus software on the net

  4. The USB Port at the front of the MRA Matrix Switch

  5. Wiser CNI - Unable to scan the network and res cross on C-Bus

  6. CNI 5500 module vs Wiser CNI

  7. CNI to CNI Communications

Loading...