Using Colour Touch Screen as CNI

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by GeorgeKosmas, May 11, 2009.

  1. GeorgeKosmas

    GeorgeKosmas

    Joined:
    Nov 24, 2004
    Messages:
    53
    Likes Received:
    1
    Location:
    Sydney
    Hi,
    I just wanted to know if its possible to use the colour touch screen as a CNI so i can program the c-bus network via the ethernet LAN.

    From the looks of things it looks like the colour touch screen has all of the hardware required for this to happen but can't get it working and can't find any documentation to say that it can be done or not.
     
    GeorgeKosmas, May 11, 2009
    #1
  2. GeorgeKosmas

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,391
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    Can't be done. Not designed for it. Does not have the required vast amounts of software to allow this.
     
    ashleigh, May 11, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-BUS Colour Touch Screen

  2. Colour Touch Screen Wiring Requirements

  3. Colour Touch screen First Impressions

  4. Colour Touch Screen PC Interface

  5. Serial Port on Colour Touch Screen

  6. Connecting to colour touch screen

  7. CNI and mk2 touch screen

Loading...