Upload c-programming into c-bus unit

Discussion in 'C-Bus Serial Protocols' started by aisya, Dec 11, 2017.

  1. aisya

    aisya

    Joined:
    Dec 11, 2017
    Messages:
    11
    Likes Received:
    0
    hi, I'm new with c-bus. Can anybody help me how to upload c-programming code into c-Bus unit? what to use?
     
    aisya, Dec 11, 2017
    #1
  2. aisya

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    You will need toolkit and a PC Interface (PCI) (Serial, USB or Ethernet). The wiser(s) can also be a PCI.

    In tool kit you need to set it up for your network and PCI and then you can scan the network and upload the groups in use.

    Do some reading http://www2.clipsal.com/cis/technical/literature

    The help file in Toolkit is also a great place to start
     
    znelbok, Dec 19, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Somfey Blinds into C-Bus

  2. Best images for upload to CTouch

  3. C-BUS into TAC

  4. Download (upload) from C-touch to PC ?

  5. Getting real time into C-Bus?

  6. Turning a 5034NL switch into an OUTPUT UNIT!!

  7. Application note for installing C-Bus 30mech switches into Saturn 4000 series plates

  8. converting c bus protocol into RS232 code

Loading...