updating C-bus hardware using old project file

Discussion in 'C-Bus Wired Hardware' started by Neil C, Mar 18, 2008.

  1. Neil C

    Neil C

    Joined:
    Jun 27, 2007
    Messages:
    46
    Likes Received:
    0
    When importing a project file on to a different PC, in order to carry out changes and updates on the live system, is it better to copy across the xml file from the original PC, or perform a backup from the old PC, along with a restore to the new PC. I need to be sure that all aspects are brought across to the new PC, including any database entries which might not be resident in the existing C-bus hardware.

    Any comments or experiences would be much appreciated.

    Thanks
     
    Neil C, Mar 18, 2008
    #1
  2. Neil C

    ICS-GS

    Joined:
    Nov 1, 2004
    Messages:
    347
    Likes Received:
    0
    Location:
    SE Melbourne
    Neil,
    Not that i know much about xml, but from all the other comments people have been making here, about all manner of things to do with the xml file, and the guys from CIS warning them away from it... I would suggest using the backup & restore method.

    HTH

    Cheers

    Grant
     
    ICS-GS, Mar 19, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. updating DLT labels without the original project file

  2. Updating a Colour Touchscreen using old programs

  3. old old .cb2 project

  4. Problem while updating Wiser Project

  5. toolkit xml file and csv file

  6. Old C-Touch dead after new Piced file download

  7. New hardware and old C-Gate versions

  8. Old BW C-Touch firmware not updating

Loading...