Unit showing 0.5V but working fine.

Discussion in 'C-Bus Wired Hardware' started by CABrouwes, Nov 26, 2011.

  1. CABrouwes

    CABrouwes

    Joined:
    Apr 25, 2009
    Messages:
    86
    Likes Received:
    2
    Location:
    New York Area
    I installed a new temperature sensor (5031RDTSL) on my network. It seems to be working fine except that it shows a voltage of only 0.5V . I have moved it to another location on my network, near units displaying a normal voltage. What could it mean other then the voltage sensor of the unit is defective ?
     
    CABrouwes, Nov 26, 2011
    #1
  2. CABrouwes

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    It is almost certainly the case that the temperature sensing circuit in that unit has a fault. This is quite independent and shouldn't affect other aspects of the unit's operation.
     
    Newman, Nov 26, 2011
    #2
  3. CABrouwes

    CABrouwes

    Joined:
    Apr 25, 2009
    Messages:
    86
    Likes Received:
    2
    Location:
    New York Area
    you mean voltage sensor not temperature, correct ?
     
    CABrouwes, Nov 27, 2011
    #3
  4. CABrouwes

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Opps, yeah, correct. Voltage sensing circuit.
     
    Newman, Nov 27, 2011
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dimmer alive but not working

  2. Logic work's in fine PICED but not in PAC little advice if possible

  3. Professional dimmers works really fine

  4. Wiser connection working on iPad but not iPhone

  5. C-Bus is working, but can't connect to it

  6. Logic on PAC causes unit reset (works fine in PICED)

  7. Local control keys stop working but remote OK

  8. Installation working but cant connect Toolkit

Loading...