Unit Configuration Changed Messages Question

Discussion in 'General Discussion' started by abg, Sep 9, 2010.

  1. abg

    abg

    Joined:
    Dec 25, 2007
    Messages:
    208
    Likes Received:
    2
    Location:
    Sydney
    Could someone explain what these messages mean?


    Unit 86 is a Reflection keypad. This has a secondary application GA assigned to one key - if I remove the secondary app GA the message does not occur on unit. This is the one that really puzzles me - what does the secondary app GA have to do with a unit configuration change?
    20100909-093609 836 //DUFFYS/254/p/86 db7aaed0-9dc8-102d-a7ce-d97917c00678 unit configuration changed (1 changes)​

    Unit 14 is a Light Level Sensor:
    20100909-093152 836 //DUFFYS/253/p/14 db579670-9dc8-102d-a97b-d97917c00678 unit configuration changed (2 changes)​

    Unit 119 is a Multi-sensor which broadcasts light level:
    20100909-093349 836 //DUFFYS/253/p/119 db4dd270-9dc8-102d-a93b-d97917c00678 unit configuration changed (2 changes)​

    The last two (I can sort of understand) as they clearly pick up changes to light levels but is this a 'unit configuration change'? That would imply the unit itself has changed configuration rather than sensing a change and letting other units etc know.

    Intrigued.....
     
    abg, Sep 9, 2010
    #1
  2. abg

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    766
    Likes Received:
    20
    Location:
    Adelaide
    While C-Gate is syncing a unit it counts the number of things that have changed since the last sync. This includes (among other things) changes to the applications or groups configured, and for the PE CELL changes to the target and margin settings.
     
    daniel, Sep 9, 2010
    #2
  3. abg

    abg

    Joined:
    Dec 25, 2007
    Messages:
    208
    Likes Received:
    2
    Location:
    Sydney
    That makes sense but why would a config changed message continue on a reflection unit that has a secondary app GA assigned to it (that doesn't change value) once the sync has completed?
     
    abg, Sep 9, 2010
    #3
  4. abg

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    766
    Likes Received:
    20
    Location:
    Adelaide
    Hi abg, its hard to say without seeing at least several minutes of log context. If you want to send some logs through I can take a look. (PMed email)
     
    daniel, Sep 9, 2010
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.