Unit Adressesing of CBUS units

Discussion in 'General Discussion' started by IanBuckle, Jan 9, 2006.

  1. IanBuckle

    IanBuckle

    Joined:
    Jul 4, 2005
    Messages:
    15
    Likes Received:
    0
    Location:
    UK
    I see all cbus units leave the factory with address 255 and must be changed
    to be unique . How do I ensure the PC interface is set to address 000 ?

    I assume I then connect the pc interface to a dimmer unit via the pink cat 5 to obtain a power supply for the pc interface and give that dimmer unit address . Do I then connect one unit at a time i.e. 3 more dimmer units and 9 saturn switches to the cbus network to set their address ?

    Or can I just add all the units onto the cbus network and the software will sort out all the conflicts ?

    Thanks in Advance.
    Ian
     
    IanBuckle, Jan 9, 2006
    #1
  2. IanBuckle

    Sergio

    Joined:
    Apr 18, 2005
    Messages:
    28
    Likes Received:
    0
    unravel feature

    Toolkit has built-in unravel feature. You may read about this feature in the Toolkit training manual chapter BCB003 page 25.
    As suggest, installation C-Bus must be more easy if you could read traning manuals before :)
     
    Sergio, Jan 9, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBus Pascal Unit

  2. Does having a 5500PACA obviate the need for the CBUS Clock Unit

  3. Adding loads more units, and moving from CBUS

  4. Voltage range for CBus units?

  5. Cbus Clock and unit address duplicated

  6. Maximum number of CBus units

  7. Cbus Report - Trigger Groups/Unit Addresses

  8. Colour of CBUS unit

Loading...