trouble with IR code for Velux Windows

I am having trouble with IR code captured from a remote for Velux Windows.
(System is on test bench with CIRCA attached, using test button to output the IR code.)

Codes from two other devices transmit OK, but the code for the Velux is not being emitted.
The Led's flash to say code should be transmitted but nothing is. (Altered repeat up to 254)

When the code was captured via the IR Reader it did not recognize any particular code (like NEC)
I gave the code the default name of Velux and the software did recognize when the same code was entered more than once
Looking at the XML code for there appears to be nothing wrong. (Captured Code Attached)

Anyone any thoughts on why this might be occurring??

 

need to send STOP command

Hello Colin,

I don't know your trouble already gone or not.
I configured IR control for Velux Windows in this spring.
I may had a same trouble with you.

For my case, I arranged STOP command before a action command.
1. make a scene to have STOP and OPEN commands.
2. button kicked a scene to use trigger function.

I'm happy, if this information help you.

Yoshi