Toolkit unable to access C-Bus project via SHAC

Discussion in 'C-Bus Automation Controllers' started by philthedill, Oct 7, 2024.

  1. philthedill

    philthedill

    Joined:
    Mar 21, 2010
    Messages:
    142
    Likes Received:
    4
    Location:
    Melbourne
    I'm running 1.17 on my 5500SHAC and Toolkit version 1.17.8 as of today and cannot connect to my C-Bus project using the SHAC built in CNI. All looks normal until the last moment - see sequence of pix

    upload_2024-10-7_10-56-9.png

    upload_2024-10-7_10-57-59.png

    upload_2024-10-7_10-59-8.png

    I've done the usual total power down etc etc and now looking for ideas please.
     
    philthedill, Oct 7, 2024
    #1
  2. philthedill

    philthedill

    Joined:
    Mar 21, 2010
    Messages:
    142
    Likes Received:
    4
    Location:
    Melbourne
    problem solved - it turned out to be a corrupted backup file on my PC causing the problem - go figure!
     
    philthedill, Oct 7, 2024
    #2
    lukehambly likes this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.