Toolkit 1.10.7 Released

Hi,

Toolkit 1.10.7 has been released. You can find it at the CIS Downloads page: http://www2.clipsal.com/cis/technical/downloads/

Major Changes

- Support for new products
- Update C-Bus USB Driver to the latest version v5.4.24 (More info and troubleshooting here)
- C-Bus USB Driver for Windows 7

Major Corrections

- 0017941: [C-Gate] Group Address on Different Applications follow each other

Toolkit Change Log

- 0017264: Can't save programming of KEYEx unit to the database if there is no matching physical KEYEx unit
- 0018003: [Add Unit dialog] Adding a secondary group adds it to primary as well
- 0017888: [Unit Dialog (general)] Synchronise Sliders doesn't properly synchronise Recovery Delay Times
- 0017499: [Unit Catalog] Reflection unit cat#'s should all start with an "R"
- 0017604: [Bar Code Scanner] Unable to add NeoX units via the scanner
- 0017529: [General Exceptions] Exception when transfering to the database in a phantom network
- 0008811: [General] Support for Wireless PCI
- 0017576: [Project Restore/Backup] Backup of a remote project produces empty 1KB file
- 0017451: [Unit : Wireless Input] Inconsistency in how remote Part Names are handled for Remote Control units
- 0017616: [General Exceptions] Exception when trying to readdress a network unit that failed to scan!
- 0016973: [Unit : SENPIR] Warning to clear occupancy events pops up when loading UI for SENPIRxx's
- 0017826: [Unit : Neo, Saturn, Reflection] Avanti firmware versions need correcting
- 0017577: [Unit : Relay : Surface Mounting] SELV relay is now the ELV relay
- 0017294: [Network Manager] Add option for unravel - new method / old method
- 0017581: [Unit Dialog (general)] "MDP Firmware" in DMX/Arch Dimmer isn't meaningful. Should rename.
- 0017556: [Unit : SENPIR] Exception in TddSENPIRSS.Destroy when opening SENPIRA unit GUI
- 0017471: [General Exceptions] Access Violation error when opening SENPIRSS unit GUI when there are network problems
- 0017433: [General Exceptions] Exception when making wireless network.
- 0017350: [Unit : DIMARx] Arch Dimmer Log file always defaults to "C:\" - could cause problems for vista
- 0017549: [Browser : Treeview] After a group is renamed on the tree view its entry is not refreshed properly on the right hand side
- 0017426: [Network Manager] I am able to select Make network on a Far side bridge
- 0017452: [Unit : Wireless Input] Subsequent Software config codes not read if user presses cancel on a previous scan
- 0017461: [Unit : DLT] Exception when scrolling Primary and Secondary Application
- 0017427: [Add Unit dialog] Different behaviour when adding 2 or more than 1 unit of the same type to a database
- 0017941: [C-Gate] Group Address on Different Applications follow each other
- 0008262: [Unit Catalog] C-Gate needs to support the wireless PCI
- 0017073: [Sync] Unpowered MRA units are still sending the network into error
- 0005712: Network Type property is required to distinguish between wired and wireless networks
- 0017292: [Units] Add wireless unravel support using re-address by serial number
- 0017064: [Units] Exception when loading DIMAR3


Regards,

Clipsal Software Team