Timers

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Chicken, May 8, 2006.

  1. Chicken

    Chicken

    Joined:
    May 7, 2006
    Messages:
    9
    Likes Received:
    0
    Location:
    Wagga Wagga
    I have a motorised blind and i am using two channels on the relay. One for up and one for down. I am using a scene for the interlock between up and down channels and using a pluse timer for the delay between button pushes and a 4 s ramp rate. But i want to have a timer setup on a seperate button on the touch screen to operate for about 7 Secs to drive the blind to half way. Is this possible without using a pac or any other devices that have a logic engine to acheive this. Am i missing something or is it just not possible.
     
    Chicken, May 8, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.