Telephone interface as RS232 PC interface

Discussion in 'C-Bus Wired Hardware' started by dsamson, Oct 23, 2018.

  1. dsamson

    dsamson

    Joined:
    Aug 23, 2004
    Messages:
    49
    Likes Received:
    1
    Location:
    Sydney
    My RS232 PC interface has been fried by a storm the other day. It was connecting my Schedule Plus computer to the C-BUS network.

    Are there any limitations or issues if I use an old C-Bus telephone interface as RS232 interface instead? I can get one from a friend for a case of beer.

    Thanks.
     
    dsamson, Oct 23, 2018
    #1
  2. dsamson

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    452
    Likes Received:
    46
    Location:
    Adelaide
    CBTI can be used as an RS232 interface, you will need a 12v power supply
    Should not cause any issue, just remember that It will be old as Clipsal have not sold these for years.
     
    Wonkey, Oct 25, 2018
    #2
  3. dsamson

    Conformist

    Joined:
    Aug 4, 2004
    Messages:
    799
    Likes Received:
    85
    Location:
    Adelaide, South Australia
    Good to see a case of beer is still legal tender
     
    Conformist, Nov 20, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBus Telephone InterFace

  2. C-Bus Telephone Interface, clicks on the line?

  3. Telephone Interface will not work with answering machines

  4. Telephone Interface glitch?

  5. Telephone interface

  6. Telephone Interface (CBTI) RS232 as PCI

  7. Pulsing groups with Telephone Interface

Loading...