TCP or UDP message

Discussion in 'General Discussion' started by Pc2022, Sep 17, 2023.

  1. Pc2022

    Pc2022

    Joined:
    Aug 3, 2022
    Messages:
    19
    Likes Received:
    1
    Wondering if there is a way to send a UDP message from Schedule plus

    or am i stuck sending 2x TCP messages.

    Essentially have a site being upgraded the current Cbus relay is being removed and the lights are being replace and another controller installed Ip based.
    A few lights need to be controlled via a relay and in turn via Cbus.
    All other Cbus hardware is remaining.

    Little stuck on where to start .
     
    Pc2022, Sep 17, 2023
    #1
  2. Pc2022

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,526
    Likes Received:
    173
    Location:
    Adelaide, Australia
    Logic in Schedule plus supports UDP. Look in the help file under Logic Engine Language/Internet/UDP
     
    Ashley, Sep 18, 2023
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.