Strobe flashes when disarming with key switch

Discussion in 'Homesafe & Security Access & Control' started by ubntu, Oct 6, 2021.

  1. ubntu

    ubntu

    Joined:
    Sep 30, 2021
    Messages:
    5
    Likes Received:
    0
    Hello

    I have a key switch wired to my Ness D8x (Zone 8). Whenever I disarm via key switch the strobe flashes. It doesn't flash when I arm/disarm via keypad or arm via key switch. I don't have the siren connected so I'm not sure if that's chirping as well.

    Is there an option to disable this?
     
    ubntu, Oct 6, 2021
    #1
  2. ubntu

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    Have you tried option P55E (strobe output zones) for zone 8
     
    Ashley, Oct 6, 2021
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Flashing RED LEDs when a key is pressed.

  2. Hardware key: Key initialize failed (DRIVER NOT INSTALLED)

  3. Away scene off when any key pressed.

  4. Thermostat cooling icon flashes, why ?

  5. Saturn key delay before next key press

  6. Help! Cbus key inputs flash when pressed but no control

  7. Lights group flashes 3 times 5 secs apart

Loading...