Storm damage to Color Display

Discussion in 'C-Bus Wired Hardware' started by dynajet, Oct 11, 2015.

  1. dynajet

    dynajet

    Joined:
    Feb 3, 2013
    Messages:
    17
    Likes Received:
    0
    Location:
    North Carolina
    My color display c-bus port does not work anymore. The unit was sent back to Schneider and that seems to be the only thing not working but it cannot be repaired. Is it possible to route through the ethernet port to a wiser unit to communicate to the c-bus module to control through the color screen?

    Any help would be appreciated.
     
    dynajet, Oct 11, 2015
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Possible Wide Screen Display Problems

  2. Is it possible to damage NIRT?

  3. Electrical Storm

  4. Does too little voltage (temporarily) cause damage to C-Bus components?

  5. Connection issues post Storm

  6. Storm Damage

  7. Color c-touch color can read but not send out c-bus messages

Loading...